Atlas Cermit N-100

ATLAS CERMIT N-100 is designed for application of decorative and protective thin-coat rendering coats outdoors and indoors:

• with external thermal insulation composite systems (ETICS) with polystyrene boards,
• upon even, appropriately prepared mineral substrates (e.g. concrete, traditional cement and cement-lime plasters),
• with the use of templates, e.g. imitating brick or stone wall in cases as listed above.

Main properties

ATLAS CERMIT N-100 is a microfibre-reinforced mixture of acrylic resins with silicone hydrophobic additives, dolomite aggregates and quartz flours as well as modifying additives, hydrophobisers and specially selected pigments.

• Strong surface hydrophobisation, self-cleaning ability – the high content of acrylic resins allows for a permanent hydrophobic effect, ensuring that dust and dirt particles do not adhere to the surface of the render and can be rinsed off during precipitation.
• It is not susceptible to algae growth due to its low surface absorption, high degree of water repellency, structural tightness of the coating and very high content of encapsulated coating substances.
• High durability of the coating during use – by using a combina-tion of silicone dispersions, special additives additives and modifiers:

– increasing the durability of the expedition,
– weatherproof and UV-resistant,
– ensures that the aesthetic appearance of the façade is main-tained over a long period of time; ATLAS CERMIT N-100 has the ability to selfclean during precipitation – it therefore does not require frequent maintenance.

• ELASTICITY AND STRENGTH – formula providing improved elasticity and resistance to impacts; render significantly compensates stress resulting from surface hits, keeps consistent, does not chip off (when used on base coat made of ATLAS STOPTER K-100). Owing to the content of special polymer resins and reinforcing with microfibres the render offers availability of obturation of cracks resulting from thermal stress and impact.
• RESISTANT TO CRACKING – improved resistance resulting from the presence of specially selected fine fillers and content of dispersed microfibers which strengthen the render within its entire volume – render is protected against possible cracks caused by tension and alternate surface heating and cooling.
• COLOUR DURABILITY – advanced technology assures colour durability resulting from the use of modern pigments and special reflexive additives as well as automatic system of dozing and permanently supervised process of manufacturing.
• Possibility of unlimited surface shaping – depending on tools and technique of application.
• Possible formation of the effect of smooth or weathered brick.
• Machine application with recommended plastering units possible.
• ENVIRONMENTALLY FRIENDLY – render recipe was designed in accordance to the sustainable development aspects: maximally reduced amount of volatile organic compounds and use of natural fillers only.